Build a Stunning DIY Timber Frame Pavilion Are you looking to create a functional, attractive outdoor workspace or patio cover? […]
How to Build a Simple Post & Beam Pavilion | Easy DIY Lean-To Guide Read Post »
Make a long-lasting rot-proof raised garden bed by casting your own round end concrete panels with these abs durable plastic molds. These concrete forms have a removable pipe that forms a hole in the overlapping end of the cast garden box wall. Rebar is inserted in the holes to pin the corners together either in a straight line or at a 90 degree corner.
Build this simple and attractive Post & Beam Lean-to Pavilion. In this video I highlight the main steps involved in
Pour thin and sleek concrete panels that link together to make long-lasting rot-proof thin garden beds. In this post I mix and pour a high strength concrete blend and cast thin garden box panels that can be linked together or stacked to create raised garden beds.
Make stackable lightweight concrete panels that link together to make long-lasting rot-proof garden beds. In this blog post I mix and pour two lightweight concrete blends and cast garden box panels that can be stacked to create deep garden beds. The two lightweight concrete blends replace the gravel in a portland cement based concrete with perlite or vermiculite.
Make a long-lasting rot-proof raised garden bed by casting your own concrete panels with these abs durable plastic molds. These concrete forms have a removable pipe that forms a hole in the overlapping end of the cast garden box wall. Rebar is inserted in the holes to pin the corners together either in a straight line or at a 90 degree corner.
How to Build Concrete Raised Garden Beds Using Reusable Plastic Molds Read Post »
In this part I create a sketchup animation from this 3D model. This simple firewood drying shed is built from standard framing 2×6 and 1×6 lumber.
Sketchup Animation Secrets | Firewood Drying Shed Read Post »
In this part I will cover the drawing and cut list this design. This simple firewood drying shed is built from standard framing 2×6 and 1×6 lumber. I detail step-by-step the drawing and generating a cut list for the 3D model using Sketchup Pro.
Sketchup Drawing Plan and Cut-List for a Firewood Drying Shed Read Post »
This simple firewood drying shed is built from standard framing 2×6 and 1×6 lumber. I detail step-by-step the construction of the 3D model using Sketchup Pro.
Our shallow well jet pump continues to run and overheat when our well runs dry. I try solving the issue
