Flexible Concrete Panel Builds — Without Buying Every Mold Size
The Original Combo Pack pairs two commonly used Original reusable plastic concrete molds to give you flexibility when building raised garden beds — without requiring a full set of every mold size.
Each pack is designed around real-world garden layouts, combining complementary panel lengths that work together naturally in bed designs while helping you save time and money compared to buying molds individually.
What’s Included in This Combo Pack
-
Original Long Starter Pack:
Includes one 36″ mold and one 48″ mold
This pairing lets you mix panel lengths to fit your garden layout while keeping panel thickness and appearance consistent.
Why Choose a Paired Original Combo Pack?
-
🧱 Complementary Sizes — mix panel lengths to fit common raised bed designs
-
🔄 Reusable for Repeated Pours — designed for dozens of pours when used as directed
-
⏱️ Pour More Panels at Once — Pro packs let you cast multiple panels per pour cycle
-
💰 Better Value Than Singles — discounted pricing lowers the cost per mold
Original Mold Advantage
Original molds create thicker, heavier concrete panels for maximum durability and long-term performance. They are ideal when strength and rigidity are more important than minimizing concrete use.
Using the same mold style across sizes ensures your finished panels match in thickness, edge profile, and overall appearance.
Which Pack Is Right for You?
-
Starter Packs — great for first builds or smaller projects
-
Pro Packs — ideal for larger beds or faster production using multiple molds at once
If you need additional sizes later, individual Original molds are available and compatible with these packs.
Built for Long-Term Value
Because each mold can be reused many times, combo packs offer one of the lowest cost-per-panel options for building raised garden beds over time — especially when pouring multiple panels per session.
Results depend on concrete mix and handling. When used as directed, molds deliver consistent, repeatable panels.
Read the Instructional Blog Post. This ABS (Acrylonitrile Butadiene Styrene) is a very tough and durable material and perfect for casting concrete.
Very quality made products, Very fast shipping
Well you can have a perfectly flat finish on them molds. Pretty great! The only drawback, and it’s a minor one, is the pvc pipe. You have one shot, if it gets stuck, the nail will tear it up, and you will end up fighting with it. What I did after, I used a copper tubing I had laying around and 3d print a handle that I bolt right through the pipe. Because it was a tiny bit smaller than the pvc, I wrapped it with painters tape. This way, even after 48h in the mold, the painters tape tear and the pipe slide out.
I have 12 done so far, and after 5-6 I dialed in the vibration method. Shake the mold violently at half way, fill it up, shake again, and then, sawzall around.
Great product! On the expensive side, but if you have a lot to do, it is worth it!
Hi,
Have you tried petroleum jelly on the pipes? Also, if stuck a small tap with a rubber mallet may free them up enough for extraction. Thanks for the feedback!!
Chhers,
Kent
Working great so far. Looking forward to assembling the garden beds.