Secure the Metal Roofing Panels
I’ve been told that the screws should be added at the peak of the corrugations and not in the valleys. As the roof may eventually leak if and when the rubber washers corrode and fail. There seems to be some disagreement out there about this. I find it’s much easier to install the screws in the valleys so that’s what I did here.
Checking overhangs
I’ve been told that the screws should be added at the peak of the corrugations and not in the valleys. As the roof may eventually leak if and when the rubber washers corrode and fail.
Temporary Clamps help the lone worker
There seems to be some disagreement out there about this. I find it’s much easier to install the screws in the valleys so that’s what I did here.
Last Roofing Panel
In the next episode coming right up, I’ll build the form, pour the concrete countertop, add the sink and shelves and finish the potting bench. I’m always interested in your thoughts, comments, or questions so please post them below.
Thanks for reading and watching. See Part 2.